- Adafruit 16 x 2 Character LCD Plate
- MCP23017 16 Port Input / Output Expander I2C
- 5V 8 Channel Relay Module Board
- Interfacing push buttons on the Rapberry Pi using GPIO pins
- Run a Raspberry Pi from 6 AA Batteries
- Adafruit designed Raspberry Pi case, produced by others
- 400 points Solderless Breadboard
- Adafruit Raspberry Pi Cobbler or T-Cobbler
- MCP23017 IO Expander 16 Bit I2C Chip
- Dagu Sensor Pan and Tilt Kit
- Adafruit Raspberry Pi Proto Plate
- PL9823 5mm RGB LED's (Similar to NeoPixles / WS2811 / WS2812)
- PL9823 8mm RGB LED's (Similar to NeoPixles / WS2811 / WS2812)
Raspberry Paul
My experiments with a Raspberry Pi
